Created with ❤ at Estonia
This tutorial provides a step-by-step guide to install Xrdp (Remote Desktop Protocol server) with GNOME GUI on Rocky Linux 8. Xrdp allows remote desktop connections to your Linux server using RDP from Windows or other systems.
: After installation, restart your computer and plug the device into a USB port. Verification in Device Manager To ensure the driver is working correctly: Right-click the Start button and select Device Manager . Expand the Smart card readers category.
Then plug in the Rockey200. Run pcsc_scan to verify detection. If not recognized, you may need to add a custom udev rule:
: It enables the reader to use standard communication protocols like T=0 and T=1 , supporting data transfer speeds up to 115kbps.
Now, plug the ROCKEY200 into a USB port. A "Device is ready" notification should appear. 3. Manual Device Manager Update
: After installation, restart your computer and plug the device into a USB port. Verification in Device Manager To ensure the driver is working correctly: Right-click the Start button and select Device Manager . Expand the Smart card readers category.
Then plug in the Rockey200. Run pcsc_scan to verify detection. If not recognized, you may need to add a custom udev rule:
: It enables the reader to use standard communication protocols like T=0 and T=1 , supporting data transfer speeds up to 115kbps.
Now, plug the ROCKEY200 into a USB port. A "Device is ready" notification should appear. 3. Manual Device Manager Update