: If the Red "Fault" LED flashes, the clamps are likely connected incorrectly. Reverse the connections. Automatic Shut-off
The charger needs to "sense" at least 2 volts in the battery to begin the charging process. If your battery is at 0V, the charger may not activate.
A: Use the formula: (Battery Ah × 1.2) ÷ 10A. Example: 60Ah battery → ~7.2 hours.
: Fully automatic system that switches to maintenance/float mode once the battery reaches full charge to prevent overcharging. Battery Reconditioning
Рассчитайте стоимость поездки заранее, заполнив онлайн форму на сайте
: If the Red "Fault" LED flashes, the clamps are likely connected incorrectly. Reverse the connections. Automatic Shut-off
The charger needs to "sense" at least 2 volts in the battery to begin the charging process. If your battery is at 0V, the charger may not activate.
A: Use the formula: (Battery Ah × 1.2) ÷ 10A. Example: 60Ah battery → ~7.2 hours.
: Fully automatic system that switches to maintenance/float mode once the battery reaches full charge to prevent overcharging. Battery Reconditioning
