Gordak 952 User Manual Updated [top] Direct

Features a closed-loop PID system for rapid heating and stable temperature regulation.

The is a professional-grade 2-in-1 ESD-safe rework station that combines a hot air gun and a soldering iron. Updated versions like the and Go to product viewer dialog for this item. gordak 952 user manual updated

Wait for nozzles to cool completely before swapping them, or use pliers to avoid burns. Self-Diagnosis: Modern versions may show error codes: S-E: Sensor error or disconnection. H-E: Heating element failure. Features a closed-loop PID system for rapid heating

⚠️ Before powering on, flip the unit over. Remove the four red screws on the chassis bottom. These secure the pump during shipping. Running the machine with these screws in will cause loud noise and internal damage. 2. Control Panel Layout Air Knob: Controls the flow rate of the heat gun. Heater Knob: Adjusts the hot air temperature. Soldering Knob: Adjusts the iron temperature. LED Displays: Shows real-time temperature for both tools. 💨 Operating the Hot Air Gun Select Nozzle: Choose a size that matches your IC chip. Power On: Toggle the "Hot Air" switch. Wait for nozzles to cool completely before swapping