Century Powermate 70 Wire Feed Welder Manual 〈Bonus Inside〉

Remove the nozzle and contact tip from the gun before pulling the trigger to feed the wire through; this prevents the wire from catching on the tip during initial loading. Powermate 70 features simplified controls for ease of use:

Open the drive rolls, push the wire through the inlet guide, across the roller groove, and into the gun liner. Drive Tension: century powermate 70 wire feed welder manual

The manual lists a specific capacitor part (#340-677) for the motor speed control. Do not replace this with a random capacitor—it must be a 0.47uF, 250VAC film capacitor. Remove the nozzle and contact tip from the