Hp Mu06 Notebook Battery Pinout Configuration Link |verified| -

Note: In some variations, the battery may require a "System Present" or "Battery Enable" pin (often Pin 4 or 7) to be jumped to ground to activate the voltage output. Technical Specifications

While I couldn't find the specific pinout configuration for the HP MU06 battery, I can provide some general information about battery pinouts. hp mu06 notebook battery pinout configuration link

The search results loaded. Most were dead links, forums from 2012 that had long since dissolved into 404 errors, or shady "download our driver updater" scams. But the third result was different. Note: In some variations, the battery may require

Understanding the is essential for anyone repairing or repurposing these batteries. Whether you need to recover a "dead" battery, rebuild it with fresh cells, or design an external charger, the 9-pin interface with SMBus, presence detection, and thermistor feedback is your roadmap. Most were dead links, forums from 2012 that

Usually dedicated to an internal thermistor for battery temperature monitoring. Pins 6 & 7:

| Pin | Signal Name | Function | Typical Wire Color | |-----|---------------|---------------------------------------------------|--------------------| | 1 | B+ (Battery+) | Main positive terminal (8.4V – 12.6V, nominal 11.4V) | Red or Black | | 2 | B+ (Battery+) | Same as Pin 1 (current sharing) | Red or Black | | 3 | SCL | SMBus Clock Line (3.3V logic, 100 kHz) | White or Gray | | 4 | SDA | SMBus Data Line (3.3V logic) | Yellow or Blue | | 5 | SMBD_ALERT# | Battery alert (interrupt to EC) - open drain | Green or Orange | | 6 | PRES (or ID) | Battery presence detection (pulled low inside battery) | Brown | | 7 | THERM | Thermistor output (10k NTC to ground, ~1.5V at 25°C) | Violet | | 8 | B- (Ground) | Main negative terminal (0V) | Black (thick) | | 9 | B- (Ground) | Same as Pin 8 (current return) | Black (thick) |