Now that your unit is powered, let’s walk through the daily operations exactly as the factory manual describes.
The unit will not initiate a weld if the external weld signal is turned off, even if the [WELD] key on the front panel is active. weltouch cy-210b manual
If you are writing or looking for the manual, the is the feature described to the end-user, while the Output Modes are the features described to the installer/engineer. Now that your unit is powered, let’s walk
# Verify device detection lsusb | grep 25B5 (or WelTouch) # No action required. If gestures don't work: sudo apt install xserver-xorg-input-evdev sudo cp /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/40-wetouch.conf Now that your unit is powered
