 |
|
|
|
OSCam can act as:
: Defines the ports and keys (like DES keys for Newcamd) used to share data with other devices. Formacionpoliticaisc oscam.server (Reader/Source Config) oscam+server+config
OSCam (Open Source Conditional Access Module) is a highly capable softcam used to decode digital television signals by facilitating communication between smart cards and network receivers. The system relies on precise configuration files to govern how the server interacts with physical readers and network clients. OSCam can act as: : Defines the ports
Among these, is the most complex. It defines two distinct things: Among these, is the most complex
| Symptom | Likely cause | Solution | |---------|--------------|----------| | No decryption | Wrong CAID/boxid | Check provider CAID, run oscam -d to debug | | High ECM time | Network latency or slow reader | Reduce mhz, check network, enable cache | | Card not detected | Wrong device path | ls /dev/sci* or lsusb for USB readers | | Clients disconnecting | Timeout too low | Increase clienttimeout to 8000+ |
: See if your clients are connected and receiving OK responses.
Powered by |