The first problem was physical. The PC’s ATX power supply was the size of a small brick, while the PS4’s internal PSU was a sleek, flat circuit board. “No way this fits inside,” he muttered. So he decided to make it an external mod. He drilled a hole in the back of the PS4’s plastic shell, feeding the PC’s main cables through like mechanical tentacles.

: +12V (se conectará a los bornes grandes de la PS4). Negro : Tierra / Ground (GND). Púrpura/Morado : +5V Standby (VBS). Paso 2: Conexión a la Placa Base de la PS4 La PS4 Fat tiene dos áreas de conexión: 1. Conexión de Alta Potencia (12V)

The second problem was the pinout. The PS4 Fat motherboard didn’t use the standard 24-pin connector Luis was used to. It had a strange, proprietary 12-pin header. He downloaded a blurry forum diagram from 2015. One user claimed: “Pin 1 is Standby (3.3V), Pin 7 is Ground, Pin 10 is PS_ON. Bridge Pin 11 and 12 for 12V rail.” Another user had simply replied: “RIP your console.”

The ATX PSU will not start without a load or a jumper. To make it turn on when the PS4 requests power, you must wire the PS4’s PS_ON (Pin 6) to the ATX’s PS_ON# (Green wire).

de la fuente de PC al pin de control (ACDC_STBY) de la PS4. Esto permitirá que la fuente de PC se encienda automáticamente cuando presiones el botón de la consola. Conexión de Potencia (12V) Suelda varios cables Amarillos (+12V)