Two Trees Sapphire Pro Firmware Link -

You can download the pre-configured project files and assets on the quentinDeroo Mks-Robin-Nano Sapphire PRO GitHub . This branch successfully addresses hotend overshoots and aligns bed dimensions accurately with default Cura profiles.

If you have heavily modified your Sapphire Pro by adding a BLTouch, upgrading to TMC2209 silent stepper drivers, or moving to a direct-drive extruder, standard pre-compiled firmware will not suffice. You will need to compile your own firmware or find a custom fork. GitHubhttps://github.com two trees sapphire pro firmware link

Turn off the printer, insert the card, and turn it back on. The printer will automatically detect the file and show a progress bar during the update. You can download the pre-configured project files and

Here is your roadmap to the best firmware options and how to install them. 1. The "Easy" Choice: Custom Community Marlin You will need to compile your own firmware

Once complete, the printer will boot into the new firmware. It is often recommended to delete the .bin file from the card afterward to prevent repeated flashing. Two Trees Sapphire Pro, 3D printer custom firmware ⚙️

If you have a Raspberry Pi and want higher speeds and more control, Klipper is the recommended choice. Configuration File: Official Klipper Sapphire Pro Config Hardware Setup: Requires compiling for 28KiB bootloader 2. Update Procedure