Prosecure Opti Combi Manual English [repack] -

If all codes are lost, the manual describes a hardware reset. This requires removing the backplate of the lock (accessible only from inside the safe). You must short two specific pins on the logic board for 10 seconds. This procedure erases all codes and returns the lock to factory default. The manual explicitly warns: "Do not perform this with the safe door closed."

After installation, verify settings by walking into the detection areas. A red LED typically indicates a safety detection, while a green LED indicates activation.

Q: How do I reset the ProSecure Opti Combi? A: Refer to the manual for instructions on resetting the combi boiler. Typically, this involves pressing a combination of buttons or switches on the control panel. prosecure opti combi manual english

For electrical diagrams or specific part numbers, users must refer to the full schematic appendix provided in the original manufacturer's documentation.

Most Prosecure Opti Combi models feature a digital display or a series of DIP switches and potentiometers to fine-tune performance. Radar (Motion) Adjustments If all codes are lost, the manual describes a hardware reset

The Prosecure Opti series (Motion/Combi) is designed for automatic door operators, combining radar technology for motion detection with infrared technology for presence detection (in Combi models). The device is engineered to activate, open, and safeguard passage areas, complying with safety regulations like DIN 18650 and EN 16005. 2. Package Contents & Technical Specifications

The sensor is designed to meet safety standards such as . Operating Voltage: 11.5 – 32 V DC. Detection Technologies: Microwave (Radar): 24.125 GHz for approach detection. This procedure erases all codes and returns the

: Used for the "safety curtain" to detect stationary or slow-moving objects in the door's threshold. LED Indicators : Active infrared detection (safety area triggered). : Microwave detection (motion area triggered). Flashing Red/Green