These cables most often contain:
| Step | Action | |------|--------| | 1 | Plug in AWM 20251 console cable | | 2 | Identify chip (look for VID_0403 via Device Manager) | | 3 | If FTDI (most likely), get driver from | | 4 | Install driver → reboot → cable appears as COM port | | 5 | Use PuTTY, SecureCRT, or screen with baud rate 9600, 8 data bits, no parity, 1 stop bit | Awm 20251 Console Cable Driver
(e.g., COM3) appears in your Device Manager, use a terminal emulator like with these standard Cisco console settings Speed (Baudrate) : 9600 (or 115200 for some newer gear) Flow control Hardware ID in your Device Manager to confirm which chipset you have? These cables most often contain: | Step |
Instead, check the USB chip on your console cable and download the matching driver from the official vendor above. You can download the latest drivers from the
One of the most common chips for high-end console cables. You can download the latest drivers from the FTDI VCP Drivers page.