Ql Bow Thruster Manual Page

: When fitting a new propeller, apply waterproof grease to the shaft and rotate the propeller until the drive pin aligns with the slot in the hub. There should be approximately a 1mm gap between the hub and the gear house.

depending on the thrust level—requiring high-capacity fuses and robust battery support. Конструктор сайтов Nethouse Common Troubleshooting QL Bow thrusters - moegster.no Ql Bow Thruster Manual

QL (Quality Line) bow thruster series, a line of marine accessories formerly supported by Volvo Penta , includes popular models like the (e.g., BP600, BP800) and the newer (e.g., CT600, CT900). Core Components A standard QL electric bow thruster unit consists of: Electric Motor : Includes relays and a relay cover. Drive System : Many QL models (like the BP800) use a belt drive system with a belt wheel and tensioner. Underwater Unit : When fitting a new propeller, apply waterproof

Pro Tip: Look for a 6-digit code starting with "BP" (Bow Propeller). Example: BP172A. Enter this code with "VETUS" into the manual search engine. Underwater Unit Pro Tip: Look for a 6-digit

The section of the manual is indispensable for ordering spares. QL uses specific part numbers that generic thrusters do not fit.